IN-STOCK EXTRA'S AVAILABLE
As part of our warehouse clearance and recent stock count, the ZENITH has been assessed and is now available as an in-stock product!
Please note that all ZENITH keyboards that are being sold in this limited run will be on a first-come-first-served basis.
Units sold will be:
🗡 Fixed ONLY
🗡 Hotswap PCB
🗡 Brass plate
🗡 Packaging included below
Aluminium plates are also available as an in-stock extra which you can purchase with the link below:
PRODUCT PAGE: https://r.works/zenith
Vintage form follows modern function.
Inspired by keyboards at the dawn of the information age, created with the best of custom keyboard design features.
Case design by ION Keyboards. PCB design by wilba.tech
Manufactured and distributed by RAMA WORKS® FOUNDRY
BOLD DESIGN BY ION KEYBOARDS
Expertly milled down from pieces of aluminium and brass to their final shapes and bead-blasted to a high grit finish, Zenith offers a vintage-inspired 0, with a bold side profile, terminating in a subtle taper.
ISOLATED GASKET MOUNT.
The Zenith plate is clamped between the top and bottom halves of the case with compressed 1.6mm polyurethanes foam strips. This dampens vibrations transfer between the plate and the case. The typing experience is crisp and clean.
INDULGENCE OF GRAVITY.
Zenith features a bottom weight milled from brass. The contrast in density between brass and aluminium provides a unique sound signature.
KURO - MOSS - HALT - OURO - MOON
MAKE IT YOUR OWN.
Personalize your Zenith by pairing it with your favorite MX switches and custom keycap set.
SOLDERLESS OR SOLDERABLE, THE CHOICE IS YOURS.
The wilba.tech WT65-XT and WT65-XTX PCBs are designed specifically for Zenith. A separate extension PCB provides USB-C connectivity that is low and centered at the rear of the keyboard.
The WT65-XT uses Kailh hot-swap sockets for assembly without soldering and it's securely anchored to the plate using standoffs.
The WT65-XTX variant is a solderable version without hot-swap sockets for those who prefer a different layout.
The plate design is compatible with both the WT65-XT and WT65-XTX PCBs.
One plate style is compatible with both PCBs. Fixed layout + variable layout variations are shown outside.
PROGRAMMING YOUR BOARD HAS NEVER BEEN EASIER.
WEIGHT AND DIMENSIONS
- Weight: 2.34 kg (5.16 pounds)
- Front height: 1.90 cm (0.75 inch)
- Width: 36.84 cm (14.50 inch)
- Depth: 12.02 cm (4.73 inch)
- 7.5° slope
- Three-piece enclosure
- Isolated gasket mounted switch plate
- USB-C interface
- WT65-XT or WT65-XTX Zenith designed by wilba.tech. QMK compatible PCB and fully programmable with VIA configurator
1 × Top Enclosure (Aluminium)
1 × Base Enclosure (Aluminium)
1 x Weight (PVD Coated Brass)
1 × Plate (Anodized Aluminium or PVD Coated Brass)
1 × wilba.tech WT65-XT or WT65-XTX PCB
1 × wilba.tech WT-USB-C extension PCB
8 × RW Black M3×8 FT T10 Fixtures (Case)
8 × RW SS M3x6 FT T10 Fixtures (Weight)
4 × RW SS M2×4 FT T10 Fixtures (Daughterboard)
8 × RW SS M2×3 FT T10 Fixtures (Hotswap PCB Only)
8 × RW SS M2×3 CSK FT T6 Fixtures (Hotswap PCB Only)
8 × RW SS M2×3.5 Spacers (Hotswap PCB Only)
1 × Set of Zenith Feet
1 x Set of Poron Strips (12 strips)
1 × XO Switchpuller
1 × RW T10 Torx Tool
1 × RW T6 Torx Tool
1 × RW Black Metal End USB-C to USB-A braided cable (USB 3.0) - 1.5m
1 × Various Packaging
Kindly note that the images are of 3D renders and are for illustration purposes only. The final colours may differ slightly.
Keycaps, stabilizers, and switches are shown for demonstrative purposes only and are not included with the Zenith.